PANTHER 5" SEAMLESS ROLLFORMER
Standard Equipment
Front pull guillotine
Seven station aluminum box
Emergency shutdown switch
Easy adjust entrance guides
Two quick release runout stands
Standard Upright System
2 spool turnstile upright & 2 aluminum spools
New aluminum spools less than half the weight of
steel spools
Modular upright system distributes the weight of
the coils to the floor of the vehicle, not the
machine
Coil tension brake
Transfer bar
|
Specifications: |
|
Dimensions: |
Top of spools to the bottom
of machine 46". Width 23". Length 96" with
straight blade guillotine. 99" with front pull
guillotine. |
|
Construction: |
3/8" steel frame welded on a
jig fixture for accuracy. Fully enclosed with 7
gauge steel sides. All parts individually plated
or painted prior to assembly. |
|
Drive/Forming
Rollers: |
Twelve drive forming rollers
- 5 bottom, 7 top. Rollers are 1045 high carbon
steel with .002 industrial hard chrome. |
|
Weight: |
1,200 lbs. |
|
Power: |
3/4 HP, high torque sealed
motor. 20-1 gear reduction unit. Machine plugs
directly into 110-120V outlet. |
|
Production: |
Approximately 35 feet per
minute |
|
Recommended
Materials: |
Maximum width 11 3/4" to 12 3/8"
Aluminum - .032 Maximum Gauge
Painted steel - 26 Maximum Gauge
Copper - 16 oz. 3/4 hard Maximum Gauge
|
|
Options: |
Straight blade guillotine
Additional runout support stands
220 volt/50hz.
Single, double or triple spool upright
available
Turnstile machine mount cradle
CE Certification
12 volt DC power
Trailer riser pad
|
